Focal FPX5.1200 5-Channel Class-D Amplifier
FOCAL
R 0.00
Availability:
- 5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt 1 x 720 Watt at 2 Ohms!
- The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.
- To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.
- Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.
- •Classe D amplifier
- •Input selector (2/4/6 channels)
- •Stable under 4 and 2 Ohms
- •Adjustable active crossover for each pair of channels
- •Dimensions: 13.25″ x 6.8″ x 2.25″ (337 x 175 x 57mm)
Specifications:
CEA power (4 ohms):
4 x 75Wrms 1 x 420Wrms
Power max (2 ohms):
4 x 120Wrms 1 x 720Wrms
Power max (channels 1 to 4 bridged at 4 ohms)
channel 5 at 2 ohms: 2 x 240Wrms 720Wrms
Bandwidth: 10Hz – 20kHz
Total harmonic distortion: < 0.03%
SNR (1W/A): > 75 dB
High-Pass / Low-Pass filters channels 1 to 4:
50Hz – 500Hz
Channel 5 (Subwoofer): Subsonic filter
(High-pass) 10Hz – 50Hz
Low-pass filter 50Hz – 250Hz
Channel 5 Bass-Boost : 45Hz / 0 to 12dB
Phase adjustable from 0 to 180° for channel 5
Copy mode: (6 CH/4 CH/2 CH)
Full range mode
Protection: Short circuit / low impedance /
reverse polarity / DC / power drop /
heat protection
Dimensions (L x H x W): 1317/64″ x 21/4″ x 657/64″
(337 x 175 x 57mm)
Weight: 9 lbs (4,1kg)